Case 836C, 836C AWD, 856C, 856C AWD Grader Manual

Grader Model: 836C, 836C AWD, 856C, 856C AWD
Publication Number: 47829048B & 47829048
English
June 2016 & January 2015
Format: PDF

Case 836C, 836C AWD, 856C, 856C AWD Grader Service Manual – 1273 Pages & 2049 Pages

Manual Table of Content:

1. Contents
2. Introduction
3. Engine
4. Transmission
5. Front Axle System
6. Rear Axle System
7. Hydrostatic Drive
8. Brakes and Controls
9. Hydraulic Systems
10. Frames and Ballasting
11. Steering
12. Wheels
13. Cab Climate Control
14. Electrical System
15. Dozer blade and arm
16. Plateform, Cab, Bodywork and Decals
17. Specials Tool Index

Manual Extract: Loader bucket control cylinder – Disassemble

1. Open the hood (1).
2. Drain the engine coolant.
3. Locate the DEF/ADBLUE® Heater Control valve up to Supply Module on the right–hand side of the engine.
4. Disconnect the machine wiring harness (2) from the DEF/ADBLUE® heater control valve.

Using a small flat blade screw driver, pull up on the fitting retaining clip and disconnect the coolant inlet (3) /outlet (5) and by-pass (4) lines from the heater control valve (1)

5. Remove the hexagonal bolts (6) securing heater control valve to the mounting support bracket and remove the heater control valve (1) from machine.